View Full Version : My new Gimmick card
nerflight
06-18-2007, 08:55 AM
Does anyone know of a gimmick card that may already be out there where you take something like say...7 of diamonds....you touch one of the diamonds and it goes blank....then you touch the 7's and they instanly change into 6's?
I've made the gimmick card to do it...just not sure if there was one already out there that I may have over looked.
the only sleights would be forceing a 7 of diamond into the person's hand when they choose a card, then placeing the 7 of diamonds on the deck and picking of the gimmcked 7 of diamonds......the gimmicked card's face will be showen the whole time....the changes really do happen just by a quick poke on the numbers and extra diamond {all visual and no cards changes during this part}.....after the changes happen you use the "color change" technic to replace the gimmicked card with a 6 of diamonds {which the gimmick card will look like at this point}which has been palmed all this time...then you hand the person the "palmed" 6 of diamonds for them to check out....then pocket the now palmed gimmick card.
Smithers
06-18-2007, 08:58 AM
you probably used the MOVING PIBS principle and just advanced it a bit, an i congradulate you on that, and if you could post a pic or vid that would be cewl
just some minor feedback:p
Benny
nerflight
06-18-2007, 09:35 AM
I'll try to get some vids done tomorrow if I got time...I'm wanting to get some vids of this trick and some vids of the Matrix/Muscle suspension done while wearing shorts {I do not think I have seen anyone do it with shorts on yet}....
Thanks for the feedback though....feedback both good and bad is always a step in advancements :)
Smithers
06-18-2007, 09:56 AM
i have a new muscle suspesion/matrix i came up with that you can do even naked, but you have to wear shoes.
it's not that big of a deal, so heres the secret. i have found this very heavy metal, it's a mixture of metals, an alloy, and a dice sized piece weighs in at about 10 pounds! all you have to do is get some thick soled boots or shoes and cut them a certain way in add the alloy. you will be able to walk, then u stop and perform!:D the overall weight in your shoes would be 80-90 pounds, depends on you own weight. it is very cool and nobody will ever figure it out!:D Ever:p !
just sometin small i came up with
for details or help,
just pm me or email me at
megamanherber@yahoo.com
Levitate Out:cool:
Benny
m4g1c
06-18-2007, 10:33 AM
i have a new muscle suspesion/matrix i came up with that you can do even naked, but you have to wear shoes.
it's not that big of a deal, so heres the secret. i have found this very heavy metal, it's a mixture of metals, an alloy, and a dice sized piece weighs in at about 10 pounds! all you have to do is get some thick soled boots or shoes and cut them a certain way in add the alloy. you will be able to walk, then u stop and perform!:D the overall weight in your shoes would be 80-90 pounds, depends on you own weight. it is very cool and nobody will ever figure it out!:D Ever:p !
just sometin small i came up with
for details or help,
just pm me or email me at
megamanherber@yahoo.com
Levitate Out:cool:
Benny
You'd still need to have strong upper theighs sense nothing is holding that.
Nice idea though
nerflight
06-18-2007, 10:59 AM
you may not want to try that one...you'll have to get knee surgery.....thats 80-90 pounds pulling on your knee legamits {however it's spelled} and ankle....and there would be no balance or way to pull back up from the bent over position....walking would not be smooth either....the avg person is around 160-180......half of 160 is 80lbs....very dangerous.
:( u stol my idia lol great minds think alike i made up somthing just like that
the pips thing
nerflight
06-18-2007, 07:18 PM
mine was just where the symbols and numbers spin like a revolveing door....i have cut the diamond and 7's out....pulled the back off them....then cutting the 6's and blank piece out...pulled their backing off...then spray adhesiveing them together with a piece of thread in between them....then glueing the excess thread onto the back of the card so that it stays in place. I've had a few other trail and erros methods also.
I'm trying to figure out what that stuff was on calssic transformer toys...the lil black square that you rub and rub and rub then the autobot or decepticon image appears....that was my first idea for this trick but I have not found out how the old skool transformer toy sticker works yet.
Ace Pepe
06-18-2007, 07:52 PM
Does anyone know of a gimmick card that may already be out there where you take something like say...7 of diamonds....you touch one of the diamonds and it goes blank....then you touch the 7's and they instanly change into 6's?
I've made the gimmick card to do it...just not sure if there was one already out there that I may have over looked.
the only sleights would be forceing a 7 of diamond into the person's hand when they choose a card, then placeing the 7 of diamonds on the deck and picking of the gimmcked 7 of diamonds......the gimmicked card's face will be showen the whole time....the changes really do happen just by a quick poke on the numbers and extra diamond {all visual and no cards changes during this part}.....after the changes happen you use the "color change" technic to replace the gimmicked card with a 6 of diamonds {which the gimmick card will look like at this point}which has been palmed all this time...then you hand the person the "palmed" 6 of diamonds for them to check out....then pocket the now palmed gimmick card.
Check this out - Ace Pepe
nerflight
06-18-2007, 07:59 PM
here is another idea I have been working on.....it works great just I can't seem to get the right angle down or something...I just cut the diamond out where it flips back like a latch.....the will expose the hole...then I put a small flip book over the hole while hand finger is covering the diamond....when i remove my finger they will still see the diamond but then I flip the book and it does this extremly visual diamond melting/fadeing away into white, can even have the diamond do a alil jumping around right before it fades away {can do this to make any symbol transform into anything}.......I mean it works great and very in your face visual and spooky....just covering up the fact there is a hole in the card is hard to cover up.
another trial and error method I have started working on today....appears to be pretty good so far.....I cut the diamond out and the blank piece {has to be perfect twin cuts so they both fit like a glove intot he cut out hole on the card}.....spray adhesive onto 2 equally sized pieces of playing card {the backs of these have to match perfect to the back of the card with the hole cut out to camoflauge it.....then I take braces rubber band stuff and basically make a cigertte thru quarter gimick quarter only useing a playing card instead.........the diamond piece will be latched from the bottom while the blank piece will be latched from the top.........all you will have to do is pull the diamond piece back and let the blank piece "snap" in front of it....
Smithers
06-20-2007, 08:47 AM
you may not want to try that one...you'll have to get knee surgery.....thats 80-90 pounds pulling on your knee legamits {however it's spelled} and ankle....and there would be no balance or way to pull back up from the bent over position....walking would not be smooth either....the avg person is around 160-180......half of 160 is 80lbs....very dangerous.Benny-lol i can edit your quote... :-)
trust me.....
i have performed this many times, but one thing you say is true:
after performing, it is virtually impossible to pull yourself up, so i have my specs pull me up... my excuse is that they should just "check" that there is no gimmicks or anything holding me up like a box with a mirror that im lying on. it is fairly hard to walk in my shoes, but after training myself by walking a whole day in them, i was able to make my walking look fairly naural.
and just so you know, i havnt' had knee surgery:D or half my body ripped off:p
Benny
nerflight
06-20-2007, 10:06 AM
Why waste the effort though....with the Matrix/muscle suspension illusion....you can walk around completly normal.......and it can be done naked as well...nothing has ever been on the body for it except in the fake pdf file some dude is passing off on ebay. Also with the Matrix, balanceing is no real problem....I mean for you to fall over, a bone would probally have to break first. I can even still ollie my skateboard while being equiped with it :) I can get back up on my own also :)
I just do not understand why you would put the weight inside your shoe?
Smithers
06-20-2007, 11:17 AM
Why waste the effort though....with the Matrix/muscle suspension illusion....you can walk around completly normal.......and it can be done naked as well...nothing has ever been on the body for it except in the fake pdf file some dude is passing off on ebay. Also with the Matrix, balanceing is no real problem....I mean for you to fall over, a bone would probally have to break first. I can even still ollie my skateboard while being equiped with it :) I can get back up on my own also :)
I just do not understand why you would put the weight inside your shoe?
2 reasons:
1) i have tried the leg/back brace version, nearly KILLED myself!!!!!!!
2) i don't know how to do your version:(
so please reveal?:rolleyes:
it would be greatly appreciated...
Benny
traumatised-magic
06-20-2007, 12:35 PM
i've had the same experience with the cheap nock off version on ebay of the matrix levitation, it really is so unpractical and dangerous, please can someone reveal the true matrix levitation
vBulletin® v3.8.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.